In actual production, the capacity of sand making machine is related to many factors.
Nowadays, the number of sand making machines in the sand industry is increasing. But as sand production enters the late stage, many users find that the efficiency of sand making machines becomes low, what is happening?
Here are 6 factors affecting the capacity of sand making machine:
- Materials
- The fineness of finished sand
- Type of sand making machine
- Standardized operation and regular maintenance
- The quality of the sand making machine
- Solution design of sand making production line
Materials
The hardness, viscosity, and humidity of different materials may differ to some extent. The capacity of sand making machine will also be different.
1、The viscosity of the material
The greater the viscosity of the material, the easier it is to adhere. Materials with high viscosity will adhere to the inner wall of the sand making cavity in the sand making machine. If it cannot be cleaned in time, it will seriously affect the efficiency of the sand making machine. In serious cases, it will even affect the normal work of the sand making machine. Therefore, when choosing materials, we must pay attention to the viscosity of the materials which should not be too big.
2、The composition of the material
The more fine powder contained in the material before sand making, the more it affects sand making. Because the fine powder is easy to adhere to and affects transportation. Therefore, you should screen the materials with excessive fine powder content once in advance to avoid affecting the normal work of the sand making machine.
3、The moisture content of the material
If the moisture content is high, then the material is easy to adhere to when being crushed in the sand making machine. It is also easy to be blocked in the process of down feeding and conveying, resulting in the reduction of sand making capacity.
To solve the problem, first of all, you should strictly control the moisture content of the material when choosing the material. If the moisture content of the material is too high, you can use sunlight or air-drying to reduce the percentage of moisture in the material.
The fineness of finished sand
The higher the fineness requirement, i.e. the finer the material required to be made into sand, the smaller the capacity. This depends on the specific requirements of the beneficiation plant. If there is no special requirement, the general fineness of the material can be set to medium or fine.
Type of sand making machine
The sand making machine types produced by different manufacturers have certain differences. The capacity and energy consumption of different models are different. You should have a certain understanding of your own production and buy the right type of sand making machine. Otherwise, it will not only affect the capacity of the equipment but also may make you spend higher costs.
Standardized operation and regular maintenance
The standard operation and regular maintenance of the sand making machine will also affect the capacity of the equipment. If the operation of sand making machine is not standardized and regular maintenance is not done, it will cause the wearing parts of the equipment to be worn out faster and the life of the equipment will be greatly reduced, and the production capacity will be smaller.
The quality of the sand making machine
High-quality sand making machine is not only energy-saving, and environmental protection, but also can easily achieve the expected capacity of the equipment. High-quality equipment can well meet the production needs of users and provide a more favorable guarantee for continuous, efficient, and safe production.
Solution design of sand making production line
The final capacity is related to all the equipment of the whole production line. For example, if your required capacity is 500t/h, you can’t just ask the sand making machine to reach 500t/h. The processing capacity of the jaw crusher, cone crusher, belt conveyor, etc. should also match it. Otherwise, the final capacity will definitely not be reached. The configuration of a production line should take into account all factors to meet your capacity requirements.